C70 Abs Check Engine Stc @ xofyne65

C70 Abs Check Engine Stc

I am 99% sure it is tbe module.. Box slides towards engine and comes out.. Inspect the crimps of the ring terminals at the box and& ... .So i followed the usuall steps removed abs stc module and re soildred all the points. Of course .You`ll have more luck with a 2000 V70 module.. I removed and sent it off to Xemodex. See photo below for images and details on the three computers. c70 abs check engine stc I received the rebuilt BCM today and installed. still the same.. Besides putting in a new battery, you want to check you main power supply from the battery (+) to the main fusebox in the engine compartment.. .. Well on full throttle the power should be linear from 2000RPM upwards provided the STC isnt kicking in.. Dont want to . Matty just sent me one for my 2000 and I placed it in my 1999 with no worries at all though they had different numbers. ...Control Unit ABS/STC a 6840 above the word STC 9496946 above the word control

.. Well on full throttle the power should be linear from 2000RPM upwards provided the STC isnt kicking in.. Dont want to . Matty just sent me one for my 2000 and I placed it in my 1999 with no worries at all though they had different numbers. ...Control Unit ABS/STC a 6840 above the word STC 9496946 above the word control . Use WD-40 liberally on connector and then it should come off (i& ...So one night, I start the car and I see the "Brake Failure, stop engine" message, along with the STC and ABS lights. My check engine light has also come on

Matty just sent me one for my 2000 and I placed it in my 1999 with no worries at all though they had different numbers. ...Control Unit ABS/STC a 6840 above the word STC 9496946 above the word control . Use WD-40 liberally on connector and then it should come off (i& ...So one night, I start the car and I see the "Brake Failure, stop engine" message, along with the STC and ABS lights. My check engine light has also come on. I am 99% sure it is tbe module.. Box slides towards engine and comes out.. Inspect the crimps of the ring terminals at the box and&

Use WD-40 liberally on connector and then it should come off (i& ...So one night, I start the car and I see the "Brake Failure, stop engine" message, along with the STC and ABS lights. My check engine light has also come on. I am 99% sure it is tbe module.. Box slides towards engine and comes out.. Inspect the crimps of the ring terminals at the box and& ... .So i followed the usuall steps removed abs stc module and re soildred all the points. Of course